Packaged Refrigeration Systems

 Blocksystem - CT Weather Proof Packaged Unit

Blocksystem CT: Weatherproof Packaged UnitBlocksystem CT: Weatherproof Packaged Unit

Blocksystem for fresh and frozen goods storage. The new CT range has been designed for being installed externally, suitable for containers with plug-in mounting on the wall.

The manufacturing solutions of these  systems enables use outside without additional protection against atmospheric agents. The structure of the housing, varnished by epoxy paint, has been designed so as to prevent the rain from entering inside the frame.

The electrical panel, placed on one side, is equipped with electronic control protected by a safety door and supplied with electrical connection designed for external use.

  • Electronic control panel   
  • Condensate water direct discharge
  • Copper and aluminium evaporator   
  • Metal sheet casing varnished with epoxy powder
  • Hermetic compressor   
  • Cold room light fixed on the panel under the evaporator
  • Compressor crankcase heater   
  • High pressure switch
  • Condensation control system (speed regulator)   
  • Low pressure switch
  • Expansion by capillary tube   
  • Package included
  • Hot gas defrost   
  • CT Full Specification

 

 

 

 

 

 

 

 

 Blocksystem - F

Blocksystem F: Complete refrigerating system contained in one housingBlocksystem F: Complete refrigerating system contained in one housing

The Blocksystem is contained in one housing, consisting of a condensing unit, evaporator and an electrical control panel. This solution enables to have a product easy to be used and installed with the maximum of versatility. The use of forefront technical solutions has enabled us to optimise the encumbrance of the machines by also improving their installation mode, especially in reduced dimension cold rooms.

Blocksystems are available for the following application fields:

  • High Temperature      (HBP) +10°C/+2°C
  • Medium Temperature  (MBP) +5°C / -5°C
  • Low Temperature        (LBP) -15°C/ -25°C

FA/FT Range for wall installation

The FA versatility is highlighted in the dual mounting mode: saddle version ( FA range) or plug-in insulating panel fitted version (FT range). Capillary expansion. Off cycle defrosting (HBP), and hot gas defrosting (MBP, LBP).

FS Range for separate condensor/evaporator sections

These machines have the compressor/condenser section separated, which is for outside installation, and a remote evaporator, which is to be installed inside the cold room. This allows the two parts to be fitted at a certain distance from one another. This range is available in two different versions: nitrogen-charged with shut-off valve connections or pre charge refrigerant and fast connections. In this case it is possible to request the supply of pre-charged connection pipes (for additional details see the optional table related to each model).

All Blocksystems are equipped with:

  • self-suppoting casing in zinc-plated metal sheet, which
    is coated with epoxy powder
  • front panel easy to be removed in order to guarantee
    an easy access to the components and a fast maintenance
    intervention
  • hermetic compressors with thermal motor protection
  • electronic board that can be programmed according to
    different user requirements
  • heat exchangers with aluminium fins and copper coils
  • condensation by air (optional condensation by water)
  • direct gas expansion with capillary tube or thermostatic
    expansion valve (optional where not fitted as standard)
  • automatic defrosting with programmable run, duration
    and frequency settings
  • integral evaporating condensing water tray, or
    condensing water direct discharge
  • integral or remote control panel (optional)
  • additional electronic module for master/slave operation
    (optional used to connect more blocksystem units
    together in a cold room with the possibility for
    synchronised operations)
  • additional electronic module for monitoring, recording
    and remote management (optional)
  • remote management system (optional)

 

Blocksystem - S

The Blocksystem is contained in one housing, consisting of a condensing unit, evaporator and an electrical control panel. This solution enables the product to be easily installed, with compact overall dimensions and reduced maintenance costs.

Blocksystems are available for the following application fields:

  • High Temperature      (HBP) +10°C/+2°C
  • Medium Temperature  (MBP) +5°C / -5°C
  • Low Temperature        (LBP) -15°C/ -25°C

SF Range for ceiling installation

Blocksystem SF: Complete refrigerating system for ceiling installationBlocksystem SF: Complete refrigerating system for ceiling installationThis enables the optimum use of the total cold room volume. They are equipped with a remote electrical control panel with a cable length of 5 m. Capillary expansion. (Optional thermostatic expansion valve). Off cycle defrosting (HBP), and hot gas defrosting (MBP, LBP).

SV Range for wall installation

These are equipped with a reduced size evaporator for the optimum use of the total cold room volume. Capillary expansion. Hot gas defrosting (MBP, LBP).

P Range for wall installation

Are available in the plug-in (PT) or saddle versions (PA- where available). (Optional thermostatic expansion valve). Off cycle defrosting (HBP), and hot gas defrosting (MBP, LBP).

SP Range for separate condensor/evaporator sections

These machines have the compressor/condenser section separated, which is for outside installation, and a remote evaporator, which is to be installed inside the cold room. This allows the two parts to be fitted at a certain distance from one another. This range is available in two different versions: nitrogen-charged with shut-off valve connections for all models or, where available, pre charge refrigerant and fast connections (SP/R). In this case it is possible to request the supply of pre-charged connection pipes (for additional details see the optional table related to each model).

All Blocksystems are equipped with:

  • self-supporting casing in zinc-plated metal sheet, which is coated with epoxy powder and easily removable panels for fast access to components during inspection or maintenance operations
  • hermetic or semi hermetic compressors with thermal motor protection
  • heat exchangers with aluminium fins and copper coils
  • direct gas expansion with capillary tube or thermostatic expansion valve (optional where not fitted as standard)
  • air cooled condenser (optional condensation by water)
  • automatic defrosting with programmable run, duration and frequency settings
  • integral evaporating condensing water tray, or condensing water direct discharge
  • electronic board that can be programmed according
    to different user requirements
  • integral or remote control panel (optional where not
    fitted as standard)
  • additional electronic module for master/slave operation
    (optional)
  • additional electronic module for monitoring, recording
    and remote management (optional)
  • remote management system (optional).